With the temperatures dropping, we wanted to pass along some tips to help avoid bursting pipes...
1. If it is extremely cold outside, keep one or two faucets running slowly at all times. Water moving through the system should prevent the line from freezing.
2. Often times, the pipes that freeze are located near an outside wall or a window, so be sure to direct warm air to any colder areas of you...r home. (Start in your basement and look for any pipes near the exterior of the home.)
3. If your kitchen sink is on an outside wall, be sure to leave cabinet doors open to allow warm air into the cabinet. Your kitchen faucet is usually a good faucet to leave on during extremely cold weather.
4. Be sure to disconnect your hose from the outside faucet. If you leave your hose connected, water is not able to drain out of your hose bib and will likely freeze and break the device.
5. There is a product called heat tape that can be installed and will warm pipes as needed during cold weather. While you could do this yourself, you may want to consult with a plumber to learn some best practices.
6. Seal leaks that allow cold air into your home where pipes are located. Look for air leaks around electrical wiring, dryer vents, and pipes. Use caulk or insulation to keep the cold out. With severe cold, even a tiny opening can let in enough cold air to cause a pipe to freeze.
7. Prevent temperatures from dropping below 32 degrees in any areas of your home where water lines are located.
8. If you still have concerns about your system, call a licensed plumber and ask them to come to your home and advise you about how to prevent pipes from freezing.